Treat Yourself this March - Spend £199+ get £10 OFF - Use code TREAT



In stock
SKU
020505

Seachem Reef Builder 300g

Seachem Reef Builder is designed to raise carbonate alkalinity without immediately impacting on pH.
£11.04
In Stock - FREE DELIVERY on orders over £49 - T&C apply

To keep corals healthy you need carbonates and calciums. Seachem Reef Builder is designed to safely raise carbonate alkalinity. It will not immediately impact on pH but with long term use there will be a tendency to stabilize at pH 8.3.

Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health.

Used as directed, Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef Builder and Reef Buffer may be used together.

 

Use Reef Builder to raise carbonate alkalinity without affecting pH. Use Reef Buffer to raise carbonate alkalinity and pH.

Unlike the competition, Reef Builder contains calcium, magnesium, and strontium to compensate for the inevitable loss which occurs when raising alkalinity.

It also contains sufficient magnesium to restore magnesium routinely depleted.

 

 

Directions:

Beginner: Use half a level teaspoon per 150 L twice a week.

Dissolve in at least one cup of freshwater.

Check alkalinity every 2 weeks and adjust dose or frequency accordingly.

 

 

Advanced:

Check alkalinity, then follow dosing regimen above until alkalinity is adjusted to 4–5 meq/L.

Each dose will raise alkalinity by about 0.25 meq/L. Size or frequency of dose can be adjusted, but do not exceed 1 meq/L per day.

Thereafter, use as required to maintain alkalinity.

 

 

Expert:

After determining the alkalinity consumption rate, set up a continuous drip system.

Use the following formula to determine how much to add to your top-off water: t=0.05va (t=teaspoons to add to top off water, v=volume of tank in US gallons, a=amount to raise alkalinity in meq/L). For example, if you want to raise your alkalinity by 1 meq/L in a 50 US gallon tank, then you would add 0.05x50x1=2.5 teaspoons into the top-off water.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top