Out of stock
SKU
SK-3000

Clarisea SK3000 Automatic

The ClariSea SK-3000 fleece filter is a high efficiency water filtration system which effectively removes suspended particles such as micro algae, detritus, food, organic waste and debris from the water column.

Special Price £239.99 Regular Price £279.99

 The ClariSea SK-3000 is suitable for use in marine aquariums, freshwater aquariums, fish-breeding systems and coral propagation systems.

Modernise your sump socks with this automatic sump roller!

Features:

- High volume filtration capacity.

- Minimal installation footprint.

- Completely replaces the need for filter socks.

- Self-assembly for easy cleaning.

- Multiple installation options.

- Automatic advance of dirty fleece.

- Multi-function smart controller.

- End of roll audible alarm.

- Filter jam/float error/water depth alarm.

- Phosphate free fleece material.

- Special low-odour fleece material.

- Integrated fail-safe overflow.

- Silencer plates for quiet operation.

- Water bypass system. 

Specifications:

- Recommended flow rate: 3,000 l/h (800 US gph).

- Particle size removal: down to 20 microns.

- Maximum submerged water depth: 20cm (8”).

- Hang-on bracket height adjustment: up to 12cm (4”).

- Maximum sump glass thickness for hang on bracket: 13mm (1/2").

- Recommended aquarium size at 5 x tank turn over (3000l/hr) = 600lt.

- Recommended aquarium size at 4 x tank turn over (3000l/hr) = 750lt.

- Inlet connection: 32mm ( 1" fitting for the U.S ).

- Filter fleece: 10cm (4”) width – length 40m (131ft).

Mounting:

The Gen2 ClariSea is very flexible and easy to position within your sump: 

- You can hang it on the back, front or sides of the most sumps.
- You can freestand it on the base of a shallow sump with a water level below 200mm.
- You can freestand it on a box or shelf in deeper sumps.
- You can feed it from the front or from the back.
- You can feed water from the top, side or at an angle.
- You can even pump feed it.

IMPORTANT NOTE:

You MUST only use the 20mm bolt to attach the motor to the ClariSea as per our Quick start guide below. Do not use the 30mm bolt, (used for the clean fleece), as this will result in damage to the motor assembly. 

Assembling:

Changing the Fleece:

Smart controller features:

Buttons & Indicators
:

Motor button
Manually advances fleece motor.
 
Alarm button
Press alarm button for 1 - 2 seconds to turn off audible alarm. Alarm condition will still be present.
  • Red LED still flashing
  • Automatic advance of fleece disabled.
  • Motor button will still function as manual advance.

Pressing the alarm button for more than 5 seconds will fully reset the controller, completely clearing the alarm state.

Disconnecting power will also reset the controller and clear the alarm state.

Normal Operation


Initialisation (Power on or reset):
• Blue/Red LED will both flash 5 times, an audible alarm will sound with each flash
• Blue LED will remain on.
Motor Advance:
Manual or automatic, Blue LED flashes
Possible Alarm Conditions:

The alarm will sound if the roll cannot advance or the float is activated for more than 5 seconds.
• Red alarm LED will flash
• Audible alarm will sound for 2 seconds every 5 seconds
 Automatic advance of fleece disabled.
 
If the float is not activated for 8 hours indicating the fleece is possibly empty.
• Blue/Red LED both flashing, audible alarm will sound for 1 second every 2 seconds
• Automatic advance of fleece disabled.
 
If there is a possible installation error and the float is not triggered with 48 hours after initial set-up or reset.
• Red LED will flash at 10 second intervals the audible alarm will sound with each flash
• Automatic advance of fleece disabled.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top